Cationic Poly Electrolyte

Samrat Industries Poly Electrolyte Cationic is a cationic polyelectrolyte. It is used for dewatering of organic sludge from sewage, human waste etc. Dewatering of organic sludge from pharma and industrial effluent.

Key Features and Benefits

• Economical to use-effective at very low dosage levels.
• Perform well over a wide pH range.
• Improve throughput and cake solids.
• Achieve high solids capture.
• Easily sealable in water.
• Dry product minimizes storage requirement.

Application and Dosage
Samrat Industries Poly Electrolyte Cation is recommended for the following solid-liquid separation process:

• Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
• Water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
• Dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
• Filtration - improve filtered water quality and plant throughput.

The above are the primary applications for this product. This product may be beneficial in any solid-liquid separation process.

Samrat Industries Poly Electrolyte Cationic dry PAM cationic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of watershould be refrained from above 50⁰ C.

Treatment Levels (for use as )
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm
Dewatering Flocculants : 0.1~ 1.0 ppm

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries Poly Electrolyte Cationic is supplied in 25kgs packs.

Samrat Industries Cationic Poly Acrylamide is a cationic polyelectrolyte (coagulant). It is used for dewatering of organic sludge from sewage, human waste etc. Sludge Dewatering from pharma and industrial effluent.

Key Features and Benefits

• Economical to use-effective at very low dosage levels.
• Perform well over a wide pH range.
• Improve throughput and cake solids.
• Achieve high solids capture.
• Easily sealable in water.
• Dry product minimizes storage requirement.

Application and Dosage
Samrat Industries Cationic Poly Acrylamide dry PAM cationic flocculants are recommended for the following solid-liquid separation process:

• Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
• Water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
• Dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
• Filtration - improve filtered water quality and plant throughput.
• Thickening - improved compaction, settling drainage and effluent quality.

The above are the primary applications for this product. This product may be beneficial in any solid-liquid separation process.

Samrat Industries Cationic Poly Acrylamide dry PAM cationic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of water should be refrained from above 50⁰ C.

Treatment Levels (for use as )
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm
Dewatering Flocculants : 0.1~ 1.0 ppm

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries Cationic Poly Acrylamide is supplied in 25kgs packs.

Cationic Coagulant is usually primary settling compounds that may also be used as a blend with other compounds depending upon the type of effluent.

Key Features and Benefits

• Decolorizing agent, COD decreasing
• Mainly used for color removal for dense color waste water
• Can be used to treat waste water from textile industry and dye houses, pigment industry, printing industry and paper industry

Application and Dosage
You are requested to refer your Samrat Industries representative for advising you the best dosage or application method.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Available in various pack sizes.

Samrat Industries’s Effluent Color Removing is a highly effective quaternary polymer compound which is used for color removal in textile, paper and dyeing industries and light color liquid from other industries.

Key Features and Benefits

• Decolorizing agent, COD decreasing
• Mainly used for color removal for dense color waste water
• Can be used to treat waste water from textile industry and dye houses, pigment industry, printing industry and paper industry

Application and Dosage
Dilute with 10 - 40 times with water and then dosed into the waste water directly, after being mixed several minutes, waste is precipitated or air - floated and the water becomes clear.

Note: pH index of waste water should be adjusted to 7-8 for best results

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries’s Effluent Color Removing is available in 50kgs / 100kgs / 250kgs HDPE jars and barrels.

Samrat Industries Speciality Limited manufactures Cationic-Polymer, a cationic polyelectrolyte coagulant/ flocculant, exhibits to be used for the purpose of dewatering of organic sludge from sewage, human waste etc. It proves to be useful in dewatering of sludge from industrial effluent. The key benefit of using Cationic Polymer is that it is economical to use effectively at very low dosage level and also performs well over a wide pH range. It can achieve high solids capture and is easily sealable in water.

Key Features and Benefits

• Effective at very low dosage
• It is economical
• Helps in dewatering of sludge from industrial effluent