Coolant

Samrat Industries INDUSTRIAL COOLANT is a liquid heat transfer fluid based on a blend of Glycol with Corrosion Inhibitor, Dye, Antifoam, Biocide (Preservative) etc. Typical coolant fomulations are mentioned below:-

Concentrated coolant ingredients:-
Mono Ethylene Glycol - 95%
Corrosion Inhibitor (RADIKOOL CI) - 1.2%
Cool Glo Coolant Dye - 0.05 to 0.1%
Foamloc Antifoam - 0.05%
Alstacide Biocide Preservative - 0.05%
Water - 3.65%

Ready to Use coolant ingredients:-
Mono Ethylene Glycol - 30%
Corrosion Inhibitor (RADIKOOL CI) - 1.0%
Cool Glo Coolant Dye - 0.05 to 0.1%
Foamloc Antifoam - 0.05%
Alstacide Biocide Preservative - 0.05%
Cool Thick \96 Coolant Thickener - 0.5% to 1%
Water - 68.5% approx.

Water based coolant ingredients:-
Corrosion Inhibitor (RADIKOOL CI) - 1.2%
Cool Glo Coolant Dye - 0.05 to 0.1%
Foamloc Antifoam - 0.05%
Alstacide Biocide Preservative - 0.05%
Cool Thick \96 Coolant Thickener - 1%
Water - 97.5% approx.

The inhibitor package is designed to protect brass, copper, solder, steel, cast iron, aluminum alloys and other components such as rubber hoses, gaskets, rubber seals, plastic components etc., that are commonly found in the cooling and heating systems and in engine and radiator.

The effectiveness of Samrat Industries INDUSTRIAL COOLANT in preventing corrosion / metal cavitation has been proven in extensive laboratory and in actual service tests. Using Samrat Industries INDUSTRIAL COOLANT for heat transfer applications instead of un-inhibited or traditional ethylene glycol, reduces maintenance costs and improves heat transfer efficiency.

Samrat Industries INDUSTRIAL COOLANT will raise the boiling point and lower the freezing point of the engine coolant. The benefits impart resistance to the engine coolant from boiling in summer Samrat Industries INDUSTRIAL COOLANT are compatible with all types of coolants (both inhibited and un-inhibited glycol based), thus enables the flexibility of being added to a coolant solution of some other brand or make.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This Product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
Industrial Coolant, Coolant Formula, Coolant Ingredients

Samrat Industries OAT COOLANT is based on Organic Acid Technology is based on Carboxylate. Corrosion Inhibited Ethylene Glycol based coolant. The inhibitor package is designed to protect brass, copper, solder, steel, cast iron, aluminum alloys and other components such as rubber hoses, gaskets, rubber seals, plastic components etc., that are commonly found in the cooling and heating systems and in engine and radiator.

The effectiveness of Samrat Industries OAT COOLANT in preventing corrosion / metal cavitation has been proven in extensive laboratory and in actual service tests. Using Samrat Industries OAT COOLANT for heat transfer applications instead of un-inhibited or traditional ethylene glycol, reduces maintenance costs and improves heat transfer efficiency.

Application and Dosage
The use method the Eutectic salts are very typical. You are requested to refer your Samrat Industries representative for advising you the best dosage or application method.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and msds for more details and shelf life.

Packing
Samrat Industries OAT COOLANT are available in various pack sizes, 1 kg (packed in case of 12 jars),5 kgs ( packed in case of 4 jars),50 kgs and 230 kgs HDPE jar or drum.

Samrat Industries ANTIFREEZE 50:50 COOLANT is a Corrosion Inhibited Ethylene Glycol based heat transfer fluids, used as an industrial / engine coolant, antifreeze agent. The inhibitor package is designed to protect brass, copper, solder, steel, cast iron, aluminum alloys and other components such as rubber hoses, gaskets, rubber seals, plastic components etc., that are commonly found in the cooling and heating systems and in engine and radiator.

The effectiveness of Samrat Industries ANTIFREEZE 50:50 COOLANT in preventing corrosion / metal cavitation has been proven in extensive laboratory and in actual service tests. Using Samrat Industries ANTIFREEZE 50:50 COOLANT for heat transfer applications instead of un-inhibited or traditional ethylene glycol, reduces maintenance costs and improves heat transfer efficiency.

Samrat Industries ANTIFREEZE 50:50 COOLANT will raise the boiling point and lower the freezing point of the engine coolant. The benefits impart resistance to the engine coolant from boiling in summer Samrat Industries ANTIFREEZE 50:50 COOLANT are compatible with all types of coolants (both inhibited and un-inhibited glycol based), thus enables the flexibility of being added to a coolant solution of some other brand or make.

Application and Dosage
Drain and flush previous fluid according to the instructions provided by the engine manufacturer. For best results in cleaning and flushing of engine raditor, add 1 part ALSTACLEAN RC50 (Radiator Internal Cleaner) to 5 parts fluid and run engine for 30-45mins. Drain out the dirty fluid and flush with water until clear water is found at the reject line. Samrat Industries ANTIFREEZE 50:50 COOLANT are added as it is into the system. Start and run engine for 5 minutes to circulate the fluid. Check for leaks and top-up system with Samrat Industries ANTIFREEZE 50:50 COOLANT if required. For maximum system protection, replace the coolants atleast every three years or 60,000kms.

Note: Do not add water to the cooling system when refilling, only add Samrat Industries ANTIFREEZE 50:50 COOLANT

Handling Measures and Precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries ANTIFREEZE 50:50 COOLANT are available in various pack sizes, 1 kg (packed in case of 12 jars), 5kgs ( packed in case of 4 jars), 50 kgs and 210 kgs HDPE jar or drum.

Samrat Industries ETHYLENE GLYCOL (also referred as Ethylene Glycol) is an organic compound having molecular formula as CH2OHCH2OH. Ethylene Glycol is widely used as an antifreeze and automotive heat transfer fluid. It is clear, colorless and practically odorless liquid completely soluble in water.

Ethylene Glycol is corrosive and toxic. Ingestion can result in death.

Application and Dosage
In new plant or normal conditions, the dosage of Samrat Industries ETHYLENE GLYCOL is ranged from 1.0 to 1.2% v/v. However, the required dosage may vary depending upon working conditions, pH and glycol-liquor ratio.

Please refer your CSL representative to calculate the required dosage for your plant.

Handling Measures and Precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries ETHYLENE GLYCOL is available in 230kgs HDPE barrels.

Description
Samrat Industries manufactures a diverse range of Coolants Oil. These are corrosion inhibited ethylene glycol based heat transfer fluid utilized as an engine or radiator coolant oil. This product effectively helps in preventing corrosion or metal cavitation. The inhibitor package is designed to protect brass, copper, solder, steel, cast iron, aluminum alloys and other components such as rubber hoses, gaskets, rubber seals, plastic components etc., that are commonly found in the cooling and heating systems and in engine and radiator.