Hydrostatic Testing Corrosion Inhibitor

PROTODIN\AE is a specially formulated chemical additive for Propylene Glycol and Ethylene Glycol to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.

PROTODIN\AE modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. PROTODIN\AE is compatible and fully functional in glycol-water & glycol-ethanol (rectified spirit) mixtures and improves heat transferability.

Key Features and Benefits

• Extends system metal life
• Saves power and increases heat transfer efficiency
• Increases life of Glycol by avoiding degradation
• Does not affect Freeze protection properties
• Does not form sludge deposit in the system
• Avoids leakage and minimizes maintenance jobs
• Avoids chances of Beverage, Brewery and Dairy batch losses due to PHE leakage
• Does not contain nitrite, borate, amines and silicate

Application and Dosage
Under normal conditions, the dosage of PROTODIN\AE is 8% w/w of the glycol quantity.

However, the required dosage may vary depending upon working conditions, pH and glycol-liquor or glycol-spirit ratio. Please refer your CSL representative to calculate the required dosage for your plant

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
PROTODIN\AE is available in 220kgs barrels.

Samrat Industries Copper Corrosion Inhibitor is a yellow metal corrosion inhibitor developed for use in closed loop system containing chiller or hot water. It prevents corrosion or rusting of yellow by forming a passive coating of protective film on copper and cu-alloys.

Samrat Industries Copper Corrosion Inhibitor contains organic dispersants that helps to keep the surface of the systems clean and thus provides the basis for the formation of an effective corrosion protection film.

Samrat Industries Copper Corrosion Inhibitor is mainly applied in chw line of hvac systems, glycol chiller, secondary cooling water systems of power plants, in the cooling systems of blast furnaces, in systems for cooling the molds in continuous casting mills and in hot and cold water systems in various industries.

Key Features and Benefits

• Yellow-Metal Corrosion Protection
• Scale Prevention
• Saves Power More Than 30%
• Non-Foaming
• Leakage And Burst Protection
• Extends System Life
• No-Chromate Or Heavy Metals
• No Descaling of Heat Exchangers
• Temperature Resistance -29oC ~ 215oc
• Enhances Cooling Efficiency

Application and Dosage
Samrat Industries Copper Corrosion Inhibitor is added neat or diluted to the water. It can be mixed with water in any ratio. It can be dosed directly to the makeup tank or with metered injection dosing pump into the closed circuit. The dosage rate is dependent on the system conditions and the amount of water loss. Initial dosage is high to establish a film on the surface. Regular dosage may be required for compensating the loss due to leakage. Please refer to your csl service engineer for exact product dosage.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
Samrat Industries Copper Corrosion Inhibitor is available in 35kgs hdpe jars and barrels.

Samrat Industries SEA WATER CORROSION INHIBITOR is a liquid product which is designed for preventing corrosion on Mild Steel and Carbon Steel (both low and high carbon) and in Sea water rich with chloride and fluoride.

Samrat Industries SEA WATER CORROSION INHIBITOR is a film forming compound and resists corrosion by repulsion technology and oxygen scavenging. It inhibits the formation of corrosive acids such as Hydrochloric and Hydrobromic Acid along with prevention of oxidation corrosion.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
Samrat Industries SEA WATER CORROSION INHIBITOR is available in 215kgs HDPE barrels.

Samrat Industries Water Hydro Testing Corrosion Inhibitor is a corrosion inhibitor based on Catalyzed Diethyl hydroxylamine which is designed for preventing corrosion on Mild Steel and Carbon Steel (both low and high carbon) and in Sea water rich with chloride and fluoride.

Samrat Industries Water Hydro Testing Corrosion Inhibitor is a liquid organic film forming compound for corrosion inhibition by repulsion technology and oxygen scavenging. It inhibits the formation of corrosive acids such as Hydrochloric and Hydrobromic Acid along with prevention of oxidation corrosion.

Key Features and Benefits

• Organic Product with C,H,O and N molecules
• Easily miscible in water
• Non-toxic with LD50 2.2g/kg (oral, rat)
• Can be discharged easily
• Prevents oxidation and acid formation
• Does not add COD and BOD
• Temperature resistance -25 to +122oC
• Eco-friendly

Application and Dosage
Samrat Industries Water Hydro Testing Corrosion Inhibitor should be fed neat with basic procedure to the tank/brine system at the rate of 100mg/l of the saline water volume used for hydrotesting. Slug feeding should be done to establish a fast protective film on the metal surface.

Protodin inhibited solution can be allowed to stay for up to 3 months under open air. The solution being organic in nature, can invite bio-fouling in presence of sunlight, in case of long term storage. To prevent biofouling ALSTACIDE CW30 should be dosed to the water at 80ppm. Handling Measures and Precautions Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. should not be injected. Please refer msds for more details.

Storage This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and msds for more details and shelf life.

Packing Samrat Industries Water Hydro Testing Corrosion Inhibitor Is Available In 215kgs Hdpe Barrels.