Polyelectrolye Flocculant

Samrat Industries Non-Ionic Polyelectrolyte is used for used for various solid-liquid separation application such as sludge dewatering, STP setting, oil field applications, drilling muds, minerals processing, paper-making, chemical wastewater treatment etc.

Key Features and Benefits

• Effective at low dosage levels.
• Perform well over a wide pH range
• Improve throughput and cake solids.
• Achieve high solids capture.
• Easily sealable in water
• Dry product minimizes storage requirement.
• Multiple applications.

Application and Dosage
Samrat Industries Non-Ionic Polyelectrolyte dry PAM non-ionic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of water should be refrained from above 50\B0C. Treatment Levels (for use as)
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm
Dewatering Flocculants : 0.1~ 1.0 ppm

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries Non-Ionic Polyelectrolyte is supplied in 25kgs packs.

Secondary Flocculation With Polyelectrolyte is the process in with the efflent water is added with polyelectrolytes for final settling. Before the secondary settling usually the effluent is dosed with primary coagulants that function to make the solids coagulate and become heavier. This helps the secondary flocculants or polyelectrolyte to instantly form flocs and do the seperation with following benefits:-

• Flocculation becomes easier
• More efficient flocculaion
• Lesser time required
• Lower dosage of polyelectrolyte

Types of secondary flocculation polyelectrolyte
Secondary Flocculating Polyelectrolytes are of various types. The range primarily includes different variants of polyacrylamide with differenct molecular weights such as low molecular weight (LMW Polyelectrolyte), medium molecular weight (MMW Polyelectrolyte), high molecular weight (HMW Polyelectrolyte) and ultra high molecular weight (UHMW Polyelectrolyte) and ionic charges such as Anionic Polyelectrolyte, Cationic Polyelectrolyte, Non-Ionic Polyelectrolyte and Amphoteric Polyelectrolyte.

Primary settling coagulants such as alum, PAC (poly aluminum chloride), ferric chloride, ferrous sulfate etc are used and from the organic range products like poly DADMAC, polyamine and poly DCDA are used.

The selection is based on type of application, system parameters and effluent type.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries Secondary Flocculation With Polyelectrolyte is supplied in 25kgs pack.

Samrat Industries Dewatering Polyelectrolyte is a high molecular wt. cationic polyelectrolyte in powder form. It is used for dewatering of organic sludge from sewage, pharma and biotechnology industry. The product is highly effective in dewatering of organic sludge from pharma effluent.

Key Features and Benefits

• Economical to use-effective at very low dosage levels
• Perform well over a wide pH range
• Improve throughput and cake solids
• Achieve high solids capture
• Easily sealable in water
• Dry product minimizes storage requirement

Application and Dosage
Samrat Industries Dewatering Polyelectrolyte dry cationic polymers are recommended for the following solid-liquid separation process:

Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
Water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
Dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
Filtration - improve filtered water quality and plant throughput.
Thickening - improved compaction, settling drainage and effluent quality.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries HIGH PH MEMBRANE CLEANER is available in HDPE containers packed in various pack sizes.

Samrat Industries Deoiling Polyelectrolyte(dope) is a powder polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Application and Dosage
The dosage range of Samrat Industries Deoiling Polyelectrolyte(dope) varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Samrat Industries Deoiling Polyelectrolyte(dope) .

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Samrat Industries Deoiling Polyelectrolyte(dope) is supplied in 25kgs pack.

Partially hydrolyzed polyacrylamide or PHPA in short serves as a polymer for drilling mud additive.It is a high molecular weight polymer that controls fluid loss and increases viscosity andreduces friction. It can be used as a flocculant, lubricant, dispersant, blocking agent, well drilling mud raw material or fluid loss additive.

Samrat Industries Speciality Limited is an ISO 9001, ISO 14001 and OHSAS 18001 certified manufacturer and supplier of Drilling Mud Additives. We have been in this field of chemicals for over a period of 40 years and we will continue to extend our services towards enriching the circadian operations of other industrial sectors.


Key Features and Benefits

• Can be used in both industrial and oil / gas drilling.
• Can be used in both fresh water and brines but requires high temperature.
• Applicable in: viscosities, friction reduction, fluid loss control and lubrication.

PHPA (Partially hydrolyzed polyacrylamide) is a polymer that is manufactured by Samrat Industries Speciality Limited to serve as a drilling mud additive.As a high molecular weight polymer, it aids in controllingthe fluid loss and increases viscosity andreduces friction. It can be used as a flocculant, dispersant, lubricant, blocking agent or fluid loss additive.

Samrat Industries Speciality Limited is an ISO 9001, ISO 14001 and OHSAS 18001 certified manufacturer and supplier of Drilling Mud Chemical. We have been in this field of chemicals for over a period of 40 years and we will continue to extend our services towards enriching the circadian operations of other industrial sectors.


Key Features and Benefits

• Can be used in both industrial and oil / gas drilling.
• Can be used in both fresh water and brines but requires high temperature.
• Applicable in: viscosities, friction reduction, fluid loss control and lubrication.

Samrat Industries Speciality Limited manufactures Acrylamide- Powder which serves to be used as a high molecular weight polymer suitable for sugarcane juice clarification and filtration of mud slurry that is especially designed for food industry. It requires a lower dosage and helps in improving the juice clarity and increases rate of mud filtration. It also helps in improving the sugar recovery from filter cake and also reduces consumption of alum in precipitation of color and colloidal matter.